Aimex Fluoride Reduction Water Filter Cartridge 3-Pack

The Aimex 8-Stage Fluoride Reduction Water Filter Cartridges deliver advanced multi-stage filtration for Australian households seeking cleaner, healthier tap water. Each cartridge combines activated carbon layers with bio ceramic infrared balls to reduce chlorine, fluoride, and common contaminants while preserving essential natural minerals. The 3-pack provides exceptional value, ensuring you have replacement filters ready for up to 18 months of continuous filtration. Designed exclusively for Aimex purifiers, these cartridges are constructed from BPA-free materials and deliver a water flow rate of 0.3 L/min for convenient daily use.

Installation is straightforward: soak each cartridge overnight in water, then rinse under warm running water for approximately 10 minutes until allblack discharge is cleared from the activated carbon. The multi-layer design progressively filters tap water through three dedicated stages, removing rust, sediment, organic chemicals, and unpleasant tastes while the bio ceramic infrared balls adjust the water to a mildly alkaline pH. Each cartridge lasts up to 6 months or 5,000 litres before requiring replacement, making these filters a cost-effective alternative to bottled water that also reduces environmental impact.

Compact at 180mm height and 84mm width, these cartridges slot directly into your Aimex water purifier without complicated setup. The premium activated carbon construction handles a wide optimum temperature range from 5°C to 35°C and operates at normal working pressure for reliable performance in most Australian household plumbing systems. Keep one filter in use while storing the spare in a cool, dry location to ensure you always have fresh filtration ready when needed.

Function

• Replaces and Restores: Required natural trace minerals
• Gradual Release: Slowly releases mineral substances
• Effective Filtration: Reduces chlorine and fluoride
• Removes Impurities: Efficiently eliminate rust, organic sediment, foul odours, and unpleasant tastes.

Installation

1. Soak the filter in water overnight.
2. Wash under warm (not boiling) water for 10 minutes until all black discharge is removed from the charcoal.
3. For Tap Water Only
4. Compatible with Aimex Purifier Only

Specifications

• Height: 180 mm
• Width: 84 mm
• Weight: 250 g
• Material: BPA Free
• Water Flow: 0.3 L/min
• Optimum Temperature Range: 5°C - 35°C
• Working Pressure: Normal

Filter Components

• Activated Carbon: Absorbs chlorine, organic chemicals, odors, and tastes. Transforms tap water into clean, purified water.
• Bio Ceramic Infrared Balls: Adjusts water to a mildly alkaline level and energizes water molecules.
• Additional Layer of Activated Carbon: Enhances taste and purification.

Benefits

• Reduces expenses and environmental footprint by eliminating bottled water purchases.
• Provides healthy alkaline water for home and office use.
• Stylish design, premium quality, and space-efficient.

Maintenance

1. Before Use: Soak the felt pad dome, carbon filter, and mineral stones in water for 30 minutes.
2. Weekly: Rinse the crystal polycarbonate water bowls.
3. Monthly: Rinse the filter system with warm water (not boiling).
4. Replacement: Change the filter every six months or after 5000L of water usage.
5. Direct Sunlight: Avoid placing the unit in direct sunlight.

Cleaning

• Wash the cartridge before first use following the installation instructions.
• If the filtration process slows, rinse the filter with warm water.
• Soak the filter and pads overnight before use.
• Keep away from direct sunlight and clean upper and lower tank with warm water every 3-4 weeks interval.
• If water flows over the middle ring, the activated carbon might be blocked; rinse with warm water. Do not use metallic scrubbers or dishwashing liquid.

Legal

• All images and written content are protected by copyright. Unauthorized use or modification is subject to legal action under the jurisdiction of NSW.